Improve inspections in wind, solar, thermal, nuclear and utility plants to prevent defects like corrosion that can harm assets and cause costly downtime.
Book a demo
Save up to $150k for a single drone-
based stack inspection
Minimize crew size to 1-2 members
for any scope of inspection
Save up to 2 weeks of downtime
compared to conventional methods
Piping
Boiler Walls
Scrubbers
Silos
Tanks
Ideal for corroded and dirty surfaces with a maximal lift-off of 4mm. Compliant with ASTM E1816 - 18. Range 2-150mm, resolution 0.06mm.
Compliant with EN 12668-1 and ISO 16831:2012 Echo-to-Echo and Pulsed Echo test mode with live A-Scan. Thickness Range 4-150 mm, resolution 0.02 us (0.06 mm at 5900 m/s)
Compliant with EN 12668-1 and ISO 16831:2012 Echo-to-Echo and Pulsed Echo test mode with live A-Scan. Operating temperature 0 – 260 °C / 32 – 500 °F.
DFT or coating thickness is the most important measurement for the inspection of protective coatings. Magnetic induction and eddy current measurement mode with a range of 0 to 1500 um / 700 um.
Apply up to 30 N of consistent force and multiple Nm of torque to structures, thanks to the distinctive drone design featuring tiltable rotors.
Navigate without boundaries and enjoy genuine omnidirectional freedom by tilting and interacting in any direction.
Operate at ease with automated flight modes and AI-assisted autonomy, even in GPS-denied environments.
Use the right tool for the right job choosing from multiple sensor payloads and a universal payload interface for third party development.
